Want to know something more about CubeSats, their origins, and what GAUSS has accomplished with them? Check the new dedicated page here on GAUSS CubeSat Satellite Design Service.
Tag Archives: cubesat
Interested in launching your CubeSat mission, but scared of launch prices? Board your 3U(+) CubeSat with us! GAUSS has set up a special promotion regarding four 3U slots on the GPOD deployer: 145,000 € to launch your satellite from UniSat-7! Your Cubesat will be integrated into UniSat-7, our next satellite to be launched. With our experience of […]
Downloads:FlyerDatasheetOption SheetLatest Radio Software InterfaceLatest Radio FirmwareAvailable on request (firstname.lastname@example.org):User’s guideCAD model in STEP The High Power GAUSS Radio UHF 5W has been designed keeping in mind its high output power and low mass and envelope. This radio is able to output up to 5W of power with a 45% efficiency.The uplink and downlink are […]
Downloads:FlyerDatasheetOption SheetLatest Radio Software InterfaceLatest Radio FirmwareAvailable on request, please contact us at email@example.comUser’s guideCAD model in STEP The Low Power GAUSS Radio UHF 2W has been designed for the smallest satellites, keeping in mind its high efficiency and low mass and envelope. This radio is able to output up to 2W of power with […]
The TuPOD, released by the ISS astronauts on January 16, 2017 at 10:50 GMT, has been navigating on its own orbit since then. Yesterday, 19 of January 2017, at around 23:30UTC, it successfully deployed the two TubeSats hosted inside its structure, TANCREDO I and OSNSAT. One hour later, at around 00:30 UTC the satellite contacted the GAUSS Ground station […]
The TuPOD transmitted on radio amateur frequencies and the HAM radio community received the satellite signal all over the world!. The frequency was 437.425MHz with a variation of +/- 10KHz due to the doppler shift. The satellite transmitted a small FM morse beacon that was activated on the 20th of January 2017 at around 0:00 UTC and it lasted for […]